Industry News
-
What does PR on the patient monitor mean
The PR on the patient monitor is the abbreviation of the English pulse rate, which reflects the speed of the human pulse. The normal range is 60-100 bpm and for most normal people, the pulse rate is the same as the heartbeat rate, so some monitors may substitute HR (hear... -
What types of patient monitor are there？
The patient monitor is a type of medical device that measures and controls the physiological parameters of a patient, and can be compared with normal parameter values, and an alarm can be issued if there is an excess. As an important first-aid device, it is an essential ... -
Multiparameter Monitor’s Function
The patient monitor generally refers to a multiparameter monitor, which measures the parameters include but not limited to: ECG, RESP, NIBP, SpO2, PR, TEPM, etc. It is a monitoring device or system to measure and control the patient's physiological parameters. The multi... -
Is it dangerous to patient if RR showing high on patient monitor
RR showing on the patient monitor means respiratory rate. If RR value is high means rapid respiratory rate. The normal people respiration rate is 16 to 20 beats per min. The patient monitor has the function of setting the upper and lower limits of RR. Usually the alarm r... -
Precautions for multiparameter patient monitor
1. Use 75% alcohol to clean the surface of the measurement site to remove the cuticle and sweat stains on human skin and prevent the electrode from bad contact. 2. Be sure to connect the ground wire, which is very important to display the waveform normally. 3. Choose the... -
How to understand the Patient Monitor parameters?
The patient monitor is used to monitor and measure a patient's vital signs including heart rate, respiration, body temperature, blood pressure, blood oxygen saturation and so on. Patient monitors usually refer to bedside monitors. This kind of monitor is common and widel...