News
-
Is it dangerous to patient if RR showing high on patient monitor
RR showing on the patient monitor means respiratory rate. If RR value is high means rapid respiratory rate. The normal people respiration rate is 16 to 20 beats per min. The patient monitor has the function of setting the upper and lower limits of RR. Usually the alarm r... -
Precautions for multiparameter patient monitor
1. Use 75% alcohol to clean the surface of the measurement site to remove the cuticle and sweat stains on human skin and prevent the electrode from bad contact. 2. Be sure to connect the ground wire, which is very important to display the waveform normally. 3. Choose the... -
How to understand the Patient Monitor parameters?
The patient monitor is used to monitor and measure a patient's vital signs including heart rate, respiration, body temperature, blood pressure, blood oxygen saturation and so on. Patient monitors usually refer to bedside monitors. This kind of monitor is common and widel... -
How patient monitor works
Medical patient monitors are a very common one in all kinds of medical electronic instruments. It is usually deployed in the CCU, ICU ward and operating room, rescue room and other used alone or networked with other patient monitors and central monitors to form ... -
Diagnostic Method of Ultrasonography
Ultrasound is an advanced medical technology, which has been a commonly used diagnostic method by doctors with good directionality. Ultrasound is divided into A type (oscilloscopic) method, B type (imaging) method, M type (echocardiography) method, fan type (two-dimensio... -
How to perform intensive care for cerebrovascular patients
1.It is essential to use a patient monitor to closely monitor vital signs, observe pupils and changes in consciousness, and regularly measure body temperature, pulse, breathing, and blood pressure. Observe the pupil changes at any time, pay attention to the size of the pupil, whether the ...